HPE ProLiant DL560 Gen10
HPE
Test Plan Version: 3.0.0
Result: Passed
Date: September 21, 2026
SW version and patch level: 26.03
Deployment Model: AIO-SX
Node Role: Controller
Latency Mode: Standard
Installation Method: BMC
Deployment Method: Imperative
Firmware Details:
iLO 5 (Redfish): 2.81
BIOS: System ROM U32 v2.76 (redundant U32 2.10)
Intel® Xeon® Gold 6148 20 Core 2.4 GHz (4)
HPE SmartMemory 32GB DDR4 2666MHz (48) - 1.5TB
HPE Smart Array P408i-a SR Gen10 - RAID1 with 2x 480GB SATA SSD
HPE StoreFabric SN1200E 16Gb FC HBA (2)
PSU HPE830272-B21 1600W FW 2.0 (2)
NIC1 2x10Gbps (HPE 562SFP+) FW 11.1.3
NIC2 2x10Gbps (HPE 562SFP+) FW 11.1.3
NIC3 2x10Gbps (HPE 562SFP+) FW 11.1.3
NIC4 4x1Gbps LoM (HPE 331FLR) FW 20.24.41
Bios Details:
Boot Mode: UEFI Mode
UEFI Optimized Boot: Enabled
Boot Order Policy: Retry Boot Order Indefinitely
Power Regulator: Static High Performance Mode
Power Core C-State: No C-states
Power Package C-State: No Package State
Intel® Turbo Boost Technology: Enabled
Energy Performance Preference: Disabled
Energy/Performance Bias: Maximum Performance
Collaborative Power Control: Disabled
Intel® DMI Link Frequency: Auto
NUMA Group Size Optimization: Flat
Intel® Performance Monitoring Support: Disabled
Uncore Frequency Scaling: Maximum
Sub-NUMA Clustering: Disabled
Energy Efficient Turbo: Disabled
Local/Remote Threshold: Auto
LLC Dead Line Allocation: Enabled
Stale A to S: Disabled
Advanced Memory Protection: Fast Fault Tolerant Memory
Memory Refresh Rate: 1x Refresh
Channel Interleaving: Enabled
Memory Controller Interleaving: Auto
Maximum Memory Bus Frequency: Auto
Memory Patrol Scrubbing: Enabled
Node Interleaving: Disabled
Memory Mirroring Mode: Full Mirror
Opportunistic Self-Refresh: Disabled
Memory Remap: No Action
Refresh Watermarks: Auto
Intel® Hyper-Threading: Enabled
Enable Cores per Processor: 0
Processor x2APIC Support: Enabled
Intel® Virtualization Technology (Intel VT): Enabled
Intel® VT-d: Enabled
SR-IOV: Enabled