PC/104 serial cards for embedded systems
Four and eight asynchronous RS-232/422/485 jumper selectable serial ports.
Four and eight asynchronous RS-232 serial ports(Xtreme/104 RS-232 models).
Supports data communications speeds up to 230.4 Kbps (RS-232) or 460.8 Kbps (RS-422/485) Custom baud rates are also available.
16C654 UARTs control each port providing 64 bytes of transmit and recieve FIFO buffers.
Supports two RS-422/485 modes: Full Duplex and Half Duplex with auto TxD echo cancellation.
Each RS-422/485 transmitter and receiver has a jumper selectable 120 Ohm termination resistor.
Eight pre-defined sets of I/O addresses are jumper selectable.
IRQ lines are jumper selectable. A choice of IRQ lines 3, 4, 5, 6, 7, 9/2, 10, 11,12, 14, 15 is available and each Xtreme/104 board can be set to run on one or two interrupts.
Independent port configuration with baud rates from 50 bps to 230.4 Kbps (Xtreme/104 RS-232 models); 50 bps to 460.8 Kbps (Xtreme/104 models RS-422/485); data bits of 5, 6, 7 or 8; stop bits of 1, 1.5, or 2, and odd, even, or stick parity.
Industrial temperature models available.
Optional DB-9 male cables available (custom connectors also available).
An ideal choice for your embedded applications, the Xtreme/104 is available with four or eight high speed asynchronous RS-232 and/or RS-422/485 ports, cabling options, and support for various operating systems. Quad UARTs provide each port with large data buffering capabilities, and each port can be configured for electrical interface, baud rate, parity, data and stop bits independently. The Xtreme/104 is the perfect combination of flexibility, high performance and cost-effectiveness.
Also available in optical isolation, electrical isolation and industrial temperature range models.
If you are interested in more information on how Wind River partners with this company, click here.