F11S - 3U CompactPCI® Intel® Atom™ CPU Board (Men Mikro Elektronik GmbH)
The F11S single-board computer is a versatile 3U Eurocard CompactPCI® board, taking 8 HP or more front space depending on its configuration. It is equipped with the Intel® Atom™ XL processor, an IA-32 core based on 45nm process technology. Some processor versions are qualified for the extended temperature range. Due to the low power architecture of the Intel® Atom™ processor, the CPU card has a total power consumption of max. 5 to 7 Watts, while having a clock frequency of up to 1.6 GHz. A specially outlined heat sink efficiently takes away the heat from the board, even in extended temperature range.
32-bit 8HP CompactPCI® system slot; Intel® Atom™ Z510P, Z530P, Z510PT, Z520PT; Up to 2 GB DDR2 SDRAM; 2 MB SRAM; CompactFlash®; microSD™ slot; 1 SATA interface via rear I/O; VGA, 2 USB, PS/2, 1 UART; 1 Gigabit and 1 Fast Ethernet; FPGA for individual user I/O at rear; -40 to +85°C screened or with qualified components
The F11S is designed especially for systems which require low power consumption, e.g. as a computing platform for rugged industrial PCs in mobile applications or for infotainment applications.
The F11S accommodates up to 2 GB of directly soldered main memory, 2 MB SRAM and an SPI boot flash. A SATA interface is available at CompactPCI® connector J2. The storage capacity is completed by a CompactFlash® socket and a microSD™ card slot.
One Gigabit Ethernet via one PCI Express® x1 link from the Intel® System Controller Hub US15WP and one FPGA-controlled Fast Ethernet via RJ45 connectors are available at the front. Further standard front I/O interfaces are one COM via a D-Sub connector, two USB 2.0, graphics (VGA up to UXGA) and keyboard/mouse.
An on-board FPGA allows implementation of additional functionality such as serial interfaces, CAN bus controllers, binary I/O, protocol converters, touch controllers etc. to the needs of the individual application in a very flexible way. Before boot-up of the system, the FPGA is loaded from the boot Flash. Updates of the FPGA contents can be made inside the boot Flash during operation and are available after a power-off of the system. A maximum of 3 SA-Adapters™ can be realized on one F11S, with I/O accessible at the front panel.
The F11S is completed by a board management controller for temperature and power supervision. It comes with a Phoenix® Award BIOS configurable for the final application.
The F11S is screened or qualified for operation in a -40°C to +85°C conduction or convection cooled environment.
If you are interested in more information on how Wind River partners with this company, click here.