Partner Product

cPCI-6240 Series  (1001)
6U CompactPCI Network Processor Blade

The cPCI-6240 is an IXP2400 based PICMG® 2.16 compliant

Network Processor Board. Dual PMC sites are provided to support

PTMC and control plane processing PMC modules. An on-board

Ethernet switch provides flexibility in the routing of packets to and

from the network processor, front panel, and PICMG 2.16 interface.

This board, in conjunction with ADLINK's Framer-Mapper Quad

OC-3 or Single OC-12 PMC-8500 modules, provides an ideal solution

for the conversion of SONET ATM or Packet-over-SONET (PoS)

to IP / Ethernet. The cPCI-6240 is designed to meet the needs of

network access and edge applications for wireless and broadband

markets including BSC/RNC/MSC, CMTS, DSLAM, FTTx, and

NG-DLC. The cPCI-6240 delivers ultimate performance in multiservice

switch and layer 4-7 applications including firewall, IDS,

and load balancing.

1001
<P>Features:</P> <UL> <LI>Intel &reg; IXP2400 Network Processor</LI> <LI>6U CompactPCI support 64-bit, 66MHz universal operation</LI> <LI>PICMG 2.0, 2.1, 2.16, 2.9, 2.15 compliant</LI> <LI>Supports two Gigabit Ethernet streams</LI> <LI>Onboard Gigabit Ethernet Switch for maximum flexibility</LI> <LI>Dual Front Panel 10/100/1000Mbps Ethernet ports</LI> <LI>Dual 10/100/1000Mbps Ethernet ports on J3 per PICMG</LI> <LI>One PTMC site provides 16-bit 50MHz Utopia Bus</LI> <LI>One PrPMC/PMC site provides additional control plane</LI> <LI>Serial Debug Port with front or rear I/O access</LI> <LI>Additional dual rear I/O GbE Ports for transition module</LI> <LI>Optional dual optical GbE ports on the front panel</LI> <LI>Boot monitor, diagnostic utility and VxWorks BSP</LI></UL>
cPCI-6240 Series
The cPCI-6240 is an IXP2400 based PICMG® 2.16 compliant Network Processor Board. Dual PMC sites are provided to support PTMC and control plane processing PMC modules. An on-board Ethernet switch provides flexibility in the routing of packets to and from the network processor, front panel, and PICMG 2.16 interface. This board, in conjunction with ADLINK's Framer-Mapper Quad OC-3 or Single OC-12 PMC-8500 modules, provides an ideal solution for the conversion of SONET ATM or Packet-over-SONET (PoS) to IP / Ethernet. The cPCI-6240 is designed to meet the needs of network access and edge applications for wireless and broadband markets including BSC/RNC/MSC, CMTS, DSLAM, FTTx, and NG-DLC. The cPCI-6240 delivers ultimate performance in multiservice switch and layer 4-7 applications including firewall, IDS, and load balancing.
NO
hardware
6U CompactPCI Network Processor Blade