Partner Product

Fibre Channel  (1081)
Fibre Channel Test & Simulation Modules

The APG-FC2 PCI module provides two Fibre Channel ports which can function Completely independent, or be configured to work together for specific modes of operation. Both ports can operate at full line rates, selectable at 1.0625 Gb/s or 2.125 Gb/s. It has the ability to mirror Port 1 traffic out of Port 2 and/or snoop a port for specific message content, and trigger dynamic simulation on the same or other ports. Each port is supported by its own processor and memory bank,eliminating host burden. Together they are interfaced to the PCI bus as a single

device, requiring only one slot. The board supports Bus Mastering PCI with DMA. The high speed FPGA (Xilinx Virtex II) based design has the speed and processing necessary to handle custom simulation with data dependencies and archiving/playback with accurate timing and error reproduction.



Our fcXplorer software is an advanced Network Analyser software package for Windows and available for AIM's APG-FC2 modules to Test, Analyse, Simulate, Monitor, Record & Playback multiple ports using our advanced GUI (Graphical User Interface). fcXplorer supports decoding and display of multiple protocols including Anonymous Subscriber Messaging (ASM), SCSI, 1553, and UDP. All data (headers and payload) may be accessed and become criteria for triggering and filtering.

1081
<P>Support for Fibre Channel&nbsp;for: PCI&nbsp;;&nbsp;API (Application Programming Interface) ;&nbsp;Powerful Databus fcXplorer Analyzer/ ParaView Visualizer for Windows.&nbsp; </P>
Fibre Channel
The APG-FC2 PCI module provides two Fibre Channel ports which can function Completely independent, or be configured to work together for specific modes of operation. Both ports can operate at full line rates, selectable at 1.0625 Gb/s or 2.125 Gb/s. It has the ability to mirror Port 1 traffic out of Port 2 and/or snoop a port for specific message content, and trigger dynamic simulation on the same or other ports. Each port is supported by its own processor and memory bank,eliminating host burden. Together they are interfaced to the PCI bus as a single device, requiring only one slot. The board supports Bus Mastering PCI with DMA. The high speed FPGA (Xilinx Virtex II) based design has the speed and processing necessary to handle custom simulation with data dependencies and archiving/playback with accurate timing and error reproduction. Our fcXplorer software is an advanced Network Analyser software package for Windows and available for AIM's APG-FC2 modules to Test, Analyse, Simulate, Monitor, Record & Playback multiple ports using our advanced GUI (Graphical User Interface). fcXplorer supports decoding and display of multiple protocols including Anonymous Subscriber Messaging (ASM), SCSI, 1553, and UDP. All data (headers and payload) may be accessed and become criteria for triggering and filtering.
NO
Fibre Channel Test & Simulation Modules