Partner Product

Promentum ATCA-4000  (523)
Compute Processing Module

The Promentum ATCA-4000 is a high performance single slot AdvancedTCA module for Intel architecture server applications. It is fully compliant with PICMG 3.0 and PICMG 3.1 for use with Ethernet base interface and Fibre Channel storage systems.



The ATCA-4000 utilizes the Intel Xeon Processor and the Intel E7501 chipset with up to 4GB of DDR-266 SDRAM with ECC. It incorporates one PMC site for flexibility. For high-speed storage access, the module supports a dual star Fibre Channel interface compliant with the PICMG 3.1 Option 7 specification. The module also supports an optional on-board 2.5 ATA hard disk for local storage. The ATCA-4000 is validated for carrier grade Linux.

523
<ul> <li>Single slot ATCA PICMG 3.0/3.1 compliant module</li> <li>Single or dual Low Voltage Intel&reg; Xeon&#8482; processors with Intel NetBurst&reg; microarchitecture and a high bandwidth front-side bus <ul> <li>2.0 GHz with 400MHz system bus</li> <li>E7501 Chipset</li> <li>512 Kbytes L2 cache</li> </ul> </li> <li>Support for up to 4GB DDR-266 ECC registered SDRAM via 4 angled DIMM sockets</li> <li>One 64-bit, 33/66MHz PMC site</li> <li>Dual Gigabit connection to backplane with optional Dual PICMG 3.1 compliant Fibre Channel for access to high-speed storage subsystems</li> <li>Optional on-board 2.5&#8221; ATA hard disk for local storage</li> <li>Intelligent Platform Management Controller (IPMC)</li> <li>Three watchdog timers for higher availability and application integrity</li> <li>Front panel I/O <ul> <li>USB port, serial port (RJ-45), and PMC slot (64-bit, 33/66MHz)</li> <li>LEDs for status, health, hard drive activity, and Ethernet/Fibre Channel connections</li> </ul> </li> <li>Support for carrier grade Linux</li> </ul>
Promentum ATCA-4000
The Promentum ATCA-4000 is a high performance single slot AdvancedTCA module for Intel architecture server applications. It is fully compliant with PICMG 3.0 and PICMG 3.1 for use with Ethernet base interface and Fibre Channel storage systems. The ATCA-4000 utilizes the Intel Xeon Processor and the Intel E7501 chipset with up to 4GB of DDR-266 SDRAM with ECC. It incorporates one PMC site for flexibility. For high-speed storage access, the module supports a dual star Fibre Channel interface compliant with the PICMG 3.1 Option 7 specification. The module also supports an optional on-board 2.5 ATA hard disk for local storage. The ATCA-4000 is validated for carrier grade Linux.
NO
hardware
Compute Processing Module