Partner Directory
Partner Product
S950 (2042)
RADIATION-TOLERANT, SPACE-QUALIFIED 3U COMPACTPCI SBC
Product Highlights
The S950 is a radiation-tolerant, space-qualified single-slot, 3U CompactPCI (cPCI) single board computer (SBC) that provides an increase in performance of up to 5x and a cost reduction of over to 3x, when compared to the point-driven, purposed-based designs currently in use.
Product Description
The S950 is a radiation-tolerant, space-qualified single-slot, 3U CompactPCI (cPCI) single board computer (SBC) that provides an increase in performance of up to 5x and a cost reduction of over to 3x, when compared to the point-driven, purposed-based designs currently in use. The conduction-cooled S950 is designed for both manned and robotic space vehicles in harsh space radiation environments found in low earth orbit (LEO), high earth orbit (HEO), and deep space applications. These include redundant mission computers, flight guidance and navigation computers, as well as command and data handling computers.
The board combines a high performance, low power PowerPC 750FX processor with a Silicon on Insulator (SOI) processor for reduced power consumption, typically less than 12 W, as well as for increased processor speed and radiation tolerance. Its custom metal frame provides substantial rigidity and shock resistance, as well as an array of stiffeners to support rugged PCI mezzanine cards (PMCs).
The S950 is rad-tolerant with a minimum board-level total ionization dose (TID) of 20 krad (Si). Flight units with higher TID tolerance are available upon request. In addition, the board is latch-up immune with a high linear energy transfer (LET) of 37 MeV*cm2/mg and features a low single event upset (SEU) rate of less than one upset per 25 years in operation at International Space Station (ISS) orbit.
The triple redundant 128 MB SDRAM features a voting mechanism incorporated into a rad-tolerant FPGA. The 1 MB dual redundant boot Flash memory, guaranteed by two independent banks, employs a watchdog mechanism that toggles between the two banks until a successful firmware reboot occurs. The board also features 64 MB of non-volatile ECC-protected user Flash memory, with an optional Flash FileSystem Driver (FFD) software package to implement a file system.
The S950 features a 33 MHz, 32-bit internal PCI bus that supports single and burst transfers, and provides the interconnection to peripheral I/O, enabling fast access between the PCI devices and the host processor. The boards external 33 MHz, 32-bit cPCI bus interface is implemented on a rad-tolerant FPGA for local processor access to cPCI resources. The board can be configured as a single-slot system controller, supporting up to seven additional cPCI boards, or as a standard cPCI board in any other cPCI bus slot.
The S950 comes with an extensive firmware package that includes boot software, an AIMon monitor/debugger tool, an AIDiag diagnostic tool, and BIT, which can be executed either during power-up or after the board has been booted. A COP/JTAG interface provides for debugging and development. The new SBC also comes with a complete board support package (BSP) for WindRivers VxWorks real-time operating system (RTOS) version 5.5.1 including drivers for users to take full advantage of the boards features. Support for other RTOS systems may be available upon request.
Web Links
-
-
Company Description
2042
The S950 is a radiation-tolerant, space-qualified single-slot, 3U CompactPCI (cPCI) single board computer (SBC) that provides an increase in performance of up to 5x and a cost reduction of over to 3x, when compared to the point-driven, purposed-based designs currently in use.
S950
The S950 is a radiation-tolerant, space-qualified single-slot, 3U CompactPCI (cPCI) single board computer (SBC) that provides an increase in performance of up to 5x and a cost reduction of over to 3x, when compared to the point-driven, purposed-based designs currently in use. The conduction-cooled S950 is designed for both manned and robotic space vehicles in harsh space radiation environments found in low earth orbit (LEO), high earth orbit (HEO), and deep space applications. These include redundant mission computers, flight guidance and navigation computers, as well as command and data handling computers.
The board combines a high performance, low power PowerPC 750FX processor with a Silicon on Insulator (SOI) processor for reduced power consumption, typically less than 12 W, as well as for increased processor speed and radiation tolerance. Its custom metal frame provides substantial rigidity and shock resistance, as well as an array of stiffeners to support rugged PCI mezzanine cards (PMCs).
The S950 is rad-tolerant with a minimum board-level total ionization dose (TID) of 20 krad (Si). Flight units with higher TID tolerance are available upon request. In addition, the board is latch-up immune with a high linear energy transfer (LET) of 37 MeV*cm2/mg and features a low single event upset (SEU) rate of less than one upset per 25 years in operation at International Space Station (ISS) orbit.
The triple redundant 128 MB SDRAM features a voting mechanism incorporated into a rad-tolerant FPGA. The 1 MB dual redundant boot Flash memory, guaranteed by two independent banks, employs a watchdog mechanism that toggles between the two banks until a successful firmware reboot occurs. The board also features 64 MB of non-volatile ECC-protected user Flash memory, with an optional Flash FileSystem Driver (FFD) software package to implement a file system.
The S950 features a 33 MHz, 32-bit internal PCI bus that supports single and burst transfers, and provides the interconnection to peripheral I/O, enabling fast access between the PCI devices and the host processor. The boards external 33 MHz, 32-bit cPCI bus interface is implemented on a rad-tolerant FPGA for local processor access to cPCI resources. The board can be configured as a single-slot system controller, supporting up to seven additional cPCI boards, or as a standard cPCI board in any other cPCI bus slot.
The S950 comes with an extensive firmware package that includes boot software, an AIMon monitor/debugger tool, an AIDiag diagnostic tool, and BIT, which can be executed either during power-up or after the board has been booted. A COP/JTAG interface provides for debugging and development. The new SBC also comes with a complete board support package (BSP) for WindRivers VxWorks real-time operating system (RTOS) version 5.5.1 including drivers for users to take full advantage of the boards features. Support for other RTOS systems may be available upon request.
NO
hardware
RADIATION-TOLERANT, SPACE-QUALIFIED 3U COMPACTPCI SBC
More Information
If you are interested in more information on how Wind River partners with this company, click here.


Wind River VxWorks Platforms 