bCOM2-L1100 (GE Intelligent Platforms)
Rugged COM Express Board
• Compliance to PICMG™ COM Express R1.0 basic form factor, Type 2 • Intel® Core™ 2 processors, soldered • Up to 2 (4) GB DDR3 SDRAM; soldered, non-ECC • Intel GS45/ICH9M SFF chipset • I/O Features - 1x VGA - 2x SDVO channels (shared with PEG) - 1x LVDS (dual channel support) - 1x Gigabit Ethernet - 8x USB 2.0 - Audio HDA - 4x Serial ATA ports (RAID) - 1x PATA - 8x GPIO (4 in, 4 out) • PCIe Expansion • Extended operating temperature range from –40° to +85° C • Temperature sensors for CPU, chipset and module • Optional conformal coating • Support of S0, S3 and S5 states • High shock and vibration immunity • Pre-mounted heat sink/spreader for optimal cooling
The bCOM2-L1100 is a rugged, Type 2 COM Express module in basic form factor. It features a soldered Intel Core 2 Duo processor with varying levels of performance-per-watt improvements to provide an excellent choice for System Integrators with low-power, high performance embedded applications requirements.
The bCOM2-L1100 offers up to 4 GB of soldered DDR3 SDRAM memory to satisfy an application’s needs. One Gigabit Ethernet port is routed to the COM Express connector, located on the baseboard. This port supports transmissions of 10 and 100 Mbit/s. An additional eight USB 2.0 ports are routed to the COM Express connector.
The bCOM2-L1100 has four serial ATA Interfaces with RAID 0 and 1 support.
Choose from the parallel-attached hard disk drive or the new serial ATA drive. The SATA interfaces are ready for SATA II drives.
For superior graphic performance, the bCOM2-L1100 features integrated analog CRT and LVDS interfaces along with two SDVO channels.
I/O functionality is provided through either four PCI Express x1 lanes or one x4 lane, a wide PCI Express x16 port, and one 32-bit/33 MHz PCI bus.
The x16 port can be used in applications where high-end graphic and video capabilities are required. Together with the audio port a wide range of multimedia implementations can be achieved.
All of these functions position the bCOM2-L1100 in applications for industrial, simulation/training, test and measurement, gaming, transportation and other market segments. With its soldered components and optional high shock and vibration protection, the module can be placed in harsh environments. Furthermore extended temperature and conformal coating options positions the module for applications in transportation, mining, MIL/Aero, and others.
Evaluation, Benchmarks, Development
The carrier board CCAR-L1000 is available for an easy and quick start, to do benchmarks or even to develop/test application software. The CCAR-L1000 is designed for the COM Express module series. The carrier supports the standard features of the bCOM2-L1100 plus PCI and PCI Express slots. For detailed functions see the CCAR-L1000 datasheet.
GE Intelligent Platforms · Strategic Hardware Partner
Tove Valley Business Park
Old Tiffield Road
Towcester, Northants NN12 6PF
If you are interested in more information on how Wind River partners with this company, click here.